Using Supercritical CO2 Instead of Water for Fracking

by Emil Morhardt

The purpose of hydraulic fracturing is to use high pressure to open up pores in deep fuel-bearing shale deposits so that the oil or natural gas can escape through boreholes to the surface. To make this work, very high pressures (hence, much surface equipment) and a great deal of water are required. To keep the pores propped open when the pressure and water recede, something (usually sand) needs to be included. The inclusion of acid can increase pore efficiency, and because water is a good biological medium, antibacterial agents may be required to prevent fouling. Finally, most of the fracking fluid returns to the surface where it presents a treatment and disposal problem. But in theory, any liquid, or supercritical substance, would work, supercritical CO2, for example. According to a study underway at Los Alamos National Laboratory (Middleton et al. 2014) sCO2 has a number of potential advantages over water, and some potential disadvantages as well. Continue reading